Ultrasonic laboratory dispersion equipment is one of the equipment with high work efficiency in the dispersion machine equipment. The equipment has advanced high shear function, which can effectively break and disperse different materials quickly. It not only breaks through the production process of traditional dispersant, but also has low energy consumption and production cost, high work efficiency and good product quality, Therefore, its trial production share is relatively high and its development prospect is relatively good.

The ultrasonic laboratory dispersion equipment can realize two to three times acceleration through belt transmission. At the same time, the vertical rotating shaft greatly improves the operation stability, improves the dynamic balance of the rotor, and allows the gap to be reduced without friction. According to the principle of stator and rotor shear, it can also realize the crushing of solid materials in liquid medium, the uniform dispersion of fine materials, and accelerate the dissolution of macromolecular substances. The specially designed equipment can also be the place where the reaction takes place. For example, two liquid materials react to generate solid particles, which are respectively introduced into the cavity. When the two materials contact, they are cut into droplets. After uniform mixing, the particles generated by the reaction are uniform in size and small in size.

During the use of ultrasonic disperser, the safety valve shall be checked regularly to prevent rust, and the drain valve shall be checked to prevent blockage by sundries. The water ring system shall be kept unblocked. If the vacuum pump is blocked during use, stop the vacuum pump immediately and clean it. restart. Because in the process of use, sometimes due to rust or foreign matters, the homogenizing head will be stuck and cause the motor to burn. Therefore, please check whether there is stall during daily maintenance to ensure its normal high-speed operation.

After the work, the user shall clean the equipment and replace the lubricating oil in advance to ensure the safe operation of the equipment again and maintain its working efficiency. In addition, according to the actual situation, the user tries to install a circulating cleaning device outside the equipment to facilitate future cleaning and maintenance, and keep it clean to ensure the ultrasonic dispersion and emulsification effect and emulsification. Quality of dairy products, fruit juices, sauces and other materials.


Post time: Nov-01-2021